Siheyuan: Originally I just wanted to be a little transparent

Chapter 179 No longer fighting alone, there are special treatment

In addition to the meritorious machine tool C620-1, Lin Shengli was also allocated a CNC machine tool independently developed and produced by our flower grower.

It was at the turn of summer and autumn in 58 that the first CNC milling machine of the new flower planter was finally born - X53K1. It was jointly developed by Tsinghua University and Sijiucheng No. [-] Machine Tool Factory. It was also the first CNC equipment in Asia.

Although from today's perspective, compared with today's advanced processing equipment, this equipment model X53K1 appears to be extremely crude. It can only realize the linkage of three coordinates. The control equipment uses a linear interpolation tube system, which is installed Behind the control cabinet, the volume is as big as 10 15-inch black and white TV sets.

The transmission system is also the simplest stepper motor servo system.

But no matter what, the success of this development can be regarded as a great leap in the history of the flower grower machinery industry.

Since then, our rabbit's mechanical processing has changed from relying on craftsmanship to relying on technology.

In the following nearly 30 years, due to foreign technology blockades and domestic basic conditions, our CNC technology did not develop well.

It was not until after the reform that our country ushered in the spring of development of the machine tool industry, and the types and models of machine tools gradually became richer.

Up to now, there are all types of lathes, including vertical, horizontal, multi-axis, CNC lathes, turning and milling combinations, etc.!

In order to support Lin Shengli's development and counterfeiting work, his superiors did their best to move all the most advanced equipment currently available to Lin Shengli.

With the addition of these meritorious artifacts, Lin Shengli is even more confident in the subsequent imitation work.

In area No. [-], these mechanical equipment take up a lot of space in Workshop [-], but fortunately Workshop [-] is large enough and spacious enough.

The remaining space was still enough and was transformed into areas three and four.

Areas [-] and [-], like area [-], are also one large compartment with a small compartment.

Area [-] serves as the location for the high-precision equipment project of the Counterfeit Research Institute.

Area [-] is the office space of the Wuye Project and the special design office.

These areas may seem similar, but they are not connected to each other. Except for the occasional overlapping use of area [-], other areas and projects are relatively independent and operate independently.

These areas divided by Lin Shengli are more like R&D centers and assembly centers.

After the reconstruction and division of the ten workshops, Lin Shengli's main job in it was actually what Lin Shengli disliked the most, drawing work!
Lin Shengli draws the drawings here, and then distributes the drawings of various parts. If they can be manufactured outside, they will be produced outside.

If it is inconvenient or cannot be produced outside, Lin Shengli will find a way to make it by hand.

However, Lin Shengli has always been full of resentment about the drawing work!

This all-hand drawing work, my hands and waist are really tiring!I miss the days of computers so much again!
Fortunately, this time, Lin Shengli is no longer alone.

After discussing with Lin Shengli, the institute sent reliable support staff to serve as Lin Shengli's assistants on the project of replicating high-end precision equipment.

These assistants all have one thing in common, which is their excellent drawing skills.

This way, it will be much simpler.

After Lin Shengli dictated the data of each component, his assistants recorded it. The assistants then drew pictures based on the photos of each numbered component that Lin Shengli took when he dismantled the equipment.

Or you can do it the other way around, first look at the photos and draw, and then mark the parameters of the parts.

After the final drawing is drawn, Lin Shengli will check it.

After the drawings are verified to be correct, production and processing will be carried out according to the drawings.

As for the special design office, they are also asked to follow suit and send assistants. I will give you whatever data you want and tell you whatever ideas you want.

If you want to imitate, just bring me the prototype equipment, and I will dismantle it for you, give you the parts data, and tell you the assembly steps. You can even ask Lin Shengli to produce the parts, but don't let him draw the pictures.

Anyway, if you ask him to draw pictures by hand, it is impossible for him to draw pictures by hand. At least Lin Shengli is not willing to draw pictures by hand in a short time!
In order to better protect Lin Shengli, as well as the security and related confidentiality of various projects.

The new security director has worked hard.

In addition to the entrance of the tenth workshop, two posts and two sentries were added to stand guard 24 hours a day.

There are also security personnel patrolling around the tenth workshop 24 hours a day.

Inside the Tenth Workshop, two security personnel were placed at the entrance of each area to ensure that no one other than Lin Shengli could enter or exit the area at will.

In order to protect Lin Shengli, a very important senior talent, his superiors temporarily assigned Lin Shengli a security guard.

This security guard followed Lin Shengli as his driver.

I don’t know how the superiors operated it. This man whom Lin Shengli called Master Wu, the driver and personal guard, actually lived in the courtyard.

Moreover, they were both in the same backyard as Lin Shengli, and it was also the east wing room next door to where Lin Shengli lived.It turned out that the reason why the family moved out was that "they found a partner and were getting married, and this room is too small for the two of them to live together in the future."

After he reported it to the leader of his unit, the leader immediately helped to change the house to two larger ones, and the one in the courtyard became available.

As soon as he left, the people in the courtyard who were worried about this room didn't even react before Master Wu moved over.

When everyone asked about it, Master Wu said, "Isn't this just in time for the upgrade of their steel rolling mill to expand enrollment? He just returned from the army's automotive class and caught up."

"What's even more coincidental is that he was assigned a job as a driver for Director Lin, who lives in the same courtyard with him!"

Isn’t this Qiao’s mother opening the door for Qiao~Qiao is home!
Although the steel rolling mill is upgrading to a half-level, renovating the factory building, and expanding the security office, which seems to be a big move, these are all considered very normal tasks.

The level of the steel rolling mill has been upgraded and it has become a truly large factory. It is not allowed to expand its recruitment, it is not allowed to carry out large-scale construction, and it is not allowed to strengthen its defense force. Therefore, these operations are very reasonable.

As for what happened in Workshop [-], apart from Lin Shengli, the only one in the factory who knew about it was Director Yang. (Not counting the Security Department, which was sent by superiors and has no technical knowledge at all. Moreover, our people's soldiers are very trustworthy.)
Workshop [-] has become a confidential workshop. Even inside the steel rolling mill, it is said that it is for the development of a new type of steel.

Regarding this statement, the majority of cadres and workers in the steel rolling mill have no doubts.

Because of the research and development of this new type of steel, the steel rolling mill had set up a project a few years ago, but it has never been implemented in detail.

This time, their steel rolling mill has been upgraded by half a level. It is only natural that these leaders want to make some achievements and start this project.

Moreover, it is very reasonable for Lin Shengli, the deputy director, chief engineer, and technical section chief, to take the lead in this project.

Maybe we can get it done this time!
This matter has caused some discussion within the steel rolling mill, but only within the steel rolling mill.

As for some forces or people outside, they have no time to deal with the Red Star Steel Rolling Mill.

Although the Red Star Steel Rolling Mill has been upgraded by half a level, it is still considered a big factory in the steel industry.

But in the eyes of those who are interested, the Red Star Steel Rolling Mill is still a blacksmith, and what it produces is just big iron blocks. There is nothing worth noting!
In a certain workshop.

"Did you all hear about it? The tenth workshop has now been changed to a confidential workshop. It seems that it is going to start some new project."

"Hey, that's it! What kind of new project is that? Isn't it just the development of a new type of steel? That thing has been set up a long time ago and has been left there without anyone taking care of it for several years."

"Oh, tell me, why did you suddenly start doing it again?"

"Isn't it strange? Our factory is now a big company in the industry, and the factory leaders have all been promoted."

"As the saying goes, there are three things a new official needs to do when taking office."

"These factory leaders are considered new officials. What's weird about restarting this old project? After all, who doesn't want to make some achievements after being promoted."

"That's true!"

"Hey, let me tell you, Wang Laosan, why are you so concerned about the factory leaders? You are a third-level worker. Isn't this just a matter of carelessness?"

"I said, Li Datou, what are you talking about? Why do you think I can just eat carrots and worry less? I am not concerned about the development of our factory."

The conversation between Wang Laosan and Li Datou attracted the attention of other workers. Another worker also spoke at this time:
"You said there is a new project here, but why haven't you seen a team set up in the factory to select people?"

Wang Laosan glanced at the worker and said, "What, you want to join the new project team?"

"I think you should stop daydreaming like this!"

"Even if the new project team selects people, they still have to be seventh- and eighth-level workers, or people from the technical department."

"If you have time to make a fool of yourself here, why not practice your skills quickly? Maybe by then you will be selected if you have enough skills."

Borrowing Wang Laosan's words, another worker also said: "Yeah, it would be great if I could join the project team. Not only would I get an extra 5 cents subsidy every day, but I would also add meat and vegetables to the canteen every day. Think about it. It’s beautiful!”

Conversations like this happen from time to time in various workshops and corners of the steel rolling mill.

The focus of everyone's discussion is how to improve technology and join the project team to develop new steel materials.

No one knew or paid attention to what was going on in the tenth workshop.

And these are exactly what the superior leaders wanted to see when they put these important projects into the steel rolling mill!
Ever since the renovation of Workshop [-] was completed and various projects were put in, Lin Shengli has been as busy as a top. During working hours, he is so busy that he has no time to catch fish or study ancient books during working hours. of!
Although he is very busy, Lin Shengli still adheres to the belief that all project members and him will never do unnecessary overtime!
According to Lin Shengli, only when you have a good rest can you work better!

On this day, after Lin Shengli had dinner in the factory canteen, he was about to take his little jeep back to the courtyard.

Lin Shengli asked Comrade Shazhu if he wanted to take his car back together.

Our Comrade Silly Zhu said that he needed to stay and take inventory of the small warehouse and would not take Lin Shengli's ride.

What Silly Zhu didn't know was that his decision caused him to miss a good show tonight!
(End of this chapter)