Siheyuan: Originally I just wanted to be a little transparent

Chapter 178 Pay tribute to the ancestors from all walks of life

Lin Shengli was mentioned as a 10th-level senior official. According to regulations, he can be equipped with an official car. (It is an official car, not a private car!)
And if Lin Shengli is not promoted, whether he is level 13 or 12, he can only use one or two official cars with several other deputy factory leaders in the factory.

As for some people occupying official cars all day long as if they were their own, that is a public car for private use, and we firmly do not advocate it!

The official car was settled. Next, the two departments discussed it and reported it to their superiors to coordinate with the military department.

A group of personnel were specially transferred from the unfamiliar combat troops and filled into the newly upgraded security office of the Red Star Steel Rolling Mill.

The original Security Section had a section chief, a deputy section chief, and three patrol teams. Each team had a captain and team members, a total of 10 people.

The expanded Security Division has one division chief and two deputy division chiefs. There is no longer a section chief, but three brigades.

Each brigade has a captain and a deputy captain. There are three squads under each brigade, and each squad has a squad leader. There are 13 people in total including the squad leader.

The leader from the combat unit was the former deputy commander of a certain unit and the commander of a certain battalion.

After arriving at the Red Star Steel Rolling Mill this time, he became the director of the Security Department, which was a small promotion by half a level.

The expanded and reorganized Security Office of the Steel Rolling Mill is nominally under the jurisdiction of Deputy Director Li.

But in reality, Deputy Director Li can only manage one deputy director of the security department and a brigade of security personnel.

Most of these people are still members of the security department of the original factory, and they continue to be responsible for the daily security work of the steel rolling mill.

The main task of the new security director and the security personnel of the two brigades under his jurisdiction is to be responsible for the security of Lin Shengli and the project site.

Before the security director came to the steel rolling mill, his superiors specifically stated that at the steel rolling mill, he and his team were under the direct jurisdiction of Director Yang and Lin Shengli. However, if there was any conflict with the project or anything related to Lin Shengli, everything would be handled by Lin Shengli. Comrade Shengli’s orders shall prevail!

The latter project, which imitated high-end precision equipment, was also placed in Workshop [-] by Lin Shengli.

The Degui Shi workshop is a newly built workshop that has not yet been put into production. It is large, new and spacious enough, and is suitable for reconstruction.

Everyone thinks that the two sides of the tenth workshop are the ninth workshop or the eleventh workshop, right?
Thinking this way is normal thinking.

But the location of the tenth workshop of Hongxing Steel Rolling Plant is actually quite strange.

This newly built No. [-] workshop is not next to that workshop in the entire Hongxing Steel Rolling Plant.

Its location is in the corner of the steel rolling mill, and the nearest workshop is 500 meters away.

If we have to say what the tenth workshop is next to, then it is next to a wall of the fourth branch.

Separated by a wall is a large open space in the Fourth Branch Factory.

Lin Shengli originally chose this place as the site for the renovation and imitation rolling mill project. First, he saw that it was new and large enough. Second, he also wanted to keep it quiet and keep it confidential.

Now is the perfect time to place a project that imitates high-end precision equipment here.

Originally, Lin Shengli planned to divide the tenth workshop into two parts. The first half would continue to be the residence of the imitation rolling mill project team, and the second half would be used as a place for the imitation of high-end precision equipment projects.

But before the renovation of the factory here was completed, General Engineer Lu's Fifth Master project also moved in.

It turned out that after the last Wuye improvement demonstration meeting held by the institute, General Engineer Lu still refused to give up and went to Dean Tang, saying that no matter what, Lin Shengli should be allowed to enter their project.

During the meeting, Dean Tang did have some things that were difficult to say and could not be said.

But when the two of them are alone, as the chief designer and the general person in charge of the Wuye project, Engineer Lu's level of confidentiality is self-evident.

Therefore, Dean Tang told Chief Engineer Lu that Lin Shengli had been hired as a distinguished honorary researcher at their institute.

After hearing this, Mr. Lu was naturally overjoyed. Now he finally got what he wanted, and he could drag Lin Shengli into their Fifth Master project.

But what Dean Tang said next was like a bucket of cold water poured over him, and Mr. Lu's burning heart was instantly doused again.

Dean Tang told Mr. Lu that Lin Shengli could not leave the steel rolling mill because he needed to develop and imitate the high-precision equipment, let alone go to Nanfei to work on their fifth master's project.

This encountered a new problem, and Mr. Lu quickly used his brain to think of countermeasures.

Soon, a new idea emerged.

General Engineer Lu and Dean Tang suggested that for their Wuye project, a special design room could be set up in the steel rolling mill.

This special design room allowed Lin Shengli to serve as the director of this special design room as an honorary researcher of the institute.

The special design office of Lin Shengli is not under the direct leadership of the project department or the research institute, but assists General Engineer Lu and his colleagues in solving problems on the project, which seems a bit like following the instructions but not the propaganda!
In this way, Lin Shengli's other tasks will not be delayed, and he can go to Lin Shengli at any time to discuss the problems encountered in their projects.However, it may be necessary for him, as the chief designer of the project, to often be a trapeze artist, flying back and forth between the two places.

Although the transport aircraft of this era are not that comfortable to sit on, they just need to be fast!
It only takes more than two hours to fly from Sijiucheng to Nanfei. Isn't it just a bit of a hassle? In order to create a better Fifth Master, we aviation people can overcome any difficulties!
After hearing this, Dean Tang felt that the proposal was feasible, so he asked General Engineer Lu to make a written application. Dean Tang reported the application to his superiors.

The reply from the superior was very interesting. The superior said this:
"One sheep is driven, two sheep are herded, or three or four sheep can be herded together!"

"Those who are able work hard. Without delaying various tasks, some things can be taken care of at the same time!"

"Of course, the prerequisite for doing these things is that we still need to seek Comrade Lin Shengli's opinion!"

(If there is resistance, will there be negative side effects? It is easy to find reasons.)
Before Dean Tang left, the superior leader specially warned:
"We must have the benefits we deserve. We are not landlords and rich people in the old days. While we know people and make good use of them, we must also respect knowledge and talents!"

Just like that, the renovation plan of Workshop [-] changed drastically once again.

The team responsible for the reconstruction and construction, after fully soliciting Lin Shengli's opinions, divided the ten workshops into four relatively independent areas.

The first area is a relatively large compartment reserved for the imitation of the new four-roller rolling mill project. It is mainly used for storing drawings and temporary meetings of the project team. In this large compartment, Lin Shengli's unique personality is still preserved. Cubicles.

Some of the original machines and equipment in the [-]th workshop that could not be used for several projects were moved to the newly built pilot workshop in the [-]th branch.

From now on, the pilot workshop of the Fourth Branch Plant will be used as the trial production base for their new four-roller rolling mill project. The project personnel, except Lin Shengli, will basically go there to work on site.

The second area is a relatively large production and manufacturing area, which is filled with various mechanical equipment allocated by superiors. It can be regarded as a small mechanical processing factory.

Among them, there is a C620-1 machine tool produced by my flower grower.

Speaking of this machine tool, we have to mention the past and present life of this machine tool.

Machine tools are the cornerstone of a country's industrial production and are related to industrial production and economic development.

And domestically produced machine tools are a symbol of national and industrial independence. The exciting news is that the first domestically produced machine tool came out soon after the establishment of the new flower planter. Its precision was so high that it could catch up with the foot pot chicken at that time.

When the West saw it, they said it was no worse than the footbath chicken, and many countries expressed their desire to buy it.

Although the importance of this machine tool is widely recognized, many people may not be very clear about the concept of machine tools.

Simply put, a machine tool is a machine that makes machines, also known as a work machine. It is the most important tool in industrial production.

It is precisely because of the existence of machine tools that industrial production can quickly produce machine parts with uniform specifications and high precision, avoiding errors caused by manual processing and time-consuming and labor-intensive defects, thereby achieving efficient and smooth assembly of products.

In the early days of the establishment of the new flower grower, everything was waiting for improvement, and it did not even have its own industrial chain.

Industrial production at that time had to import machine tools from abroad at high prices, and industrial development was difficult.

Owning your own machine tool was an urgent task at that time.

Under such circumstances, the workers of Shenyang No. 55 Machine Tool Factory, based on the machine tool drawings provided by Mao Xiong and under the condition of very backward equipment and technology, overcame the difficulties and successfully manufactured the C8-620 machine tool in August 1.

The C620-1 machine tool is a typical turning horizontal processing machine tool.

Since its birth, it has been widely used in the machining industry.

The spindle is the main moving part of the lathe. The quality of the spindle directly affects the machining accuracy of the machine tool.

The C620-1 lathe independently produced by the flower grower has extremely high spindle component quality, and the machine tool's machining precision is not inferior to the foot pot machine tools that dominated domestic factories at that time.

This is also the reason why the C620-1 machine tool plays an important role in the development and construction of the national economy.

In order to commemorate this domestic machine tool, which is of great significance to flower growers, the two-yuan banknotes issued in 60 showed the figures of workers working hard using the machine tools.

Domestic machine tools accompanied flower growers through that period of hard construction and laying the foundation for modern industry.

Today's machine tool industry is booming. CNC machine tools with higher precision and higher performance have begun to enter the production lines of all walks of life. Domestic machine tools like the C620-1 have gradually withdrawn from the stage of history.

Although the C620-1 lathe has faded from people's sight, it will never be forgotten.

In the Flower Planter Industrial Museum, a rusty C620-1 machine tool is still preserved. Every year, a large number of visitors come to commemorate this once important machine of the country.

It is a symbol of the national independence and industrial independence of the flower growers. The people of the flower growers will remember its contribution and continue to exert the craftsmanship of independence and hard research to strive for excellence in the flower growers' manufacturing and lead them to the top of the world!

(End of this chapter)