Marvel Little Genius

The principle of the antimatter atomic gun is very simple. It just replaces the electrons emitted from the electron gun with antimatter atoms with added charges.

Regarding the capture and preservation of antimatter atoms, when Mark was studying antimatter annihilation bombs, he had already designed a set of mature equipment. It only needed to be slightly combined with the electron gun, and the antimatter atomic gun was ready.

Next, Mark fixed the modified anti-matter atomic gun on a machining arm, and then used a CNC computer to complete the work of inscribing magic symbols on the Uru metal.

From the collected wreckage of the Destroyer, he selected two relatively regular-shaped metal fragments, and Mark was going to engrave the magic talisman of [Magic Growth] on them, using them as two magic energy poles.

These two magic energy poles function like the positive and negative poles in a circuit. Mark will connect them to the collected Uru metal fragments, and use the huge magic power converted from them to melt the Uru metal into a liquid state.

Then, the Uru metal is cast into the parts Mark needs through the casting mold prepared in advance.

But before that, there is still one step of work that needs to be completed in advance, which is to clean off the rune charms that originally remained on the fragments.

The Uru metal fragments obtained from the Destroyer contain a large number of rune talismans. The function of these talismans is to set the various functions of the Destroyer and how to control it.

However, because the fragments collected by Mark are too fragmented and most of them are missing, although a large amount of data has been collected from them, no useful data has yet been sorted out.

Fix the two selected fragments on the clamp, start the antimatter atomic gun, and the cleaning officially begins. The whole process takes a long time, because the atomic gun has a small area of ​​effect, and the same area needs to be cleaned multiple times to completely remove the mark of the magic talisman.

After completing this process, there is a long waiting process of engraving the magic talisman. Mark left all these matters to Dabai, then entered the virtual laboratory and began to design the structural design of the nanorobot to be injected into the body, as well as the various functional modules to be integrated on it.

Until the next day, when Mark exited the virtual laboratory and came out to rest and relax, the production of two magic poles had been completed. According to Mark's plan in advance, Dabai had just melted all the Uru metal fragments into a liquid state through magic energy and injected them into the prepared mold.

There are no magic rune patterns reserved on the inside of the mold. In order to ensure the accuracy of the magic runes, Mark plans to carve out all the magic rune lines with an atomic gun even if it takes more time.

Mark's design for this device for purifying and storing Pym particles is not divided into small doses for storage like Dr. Pym, but a large device with a huge capacity.

Dr. Pym considered the convenience of using it on the Ant-Man suit and used a small-dose design. However, Mark's use of Pym particles is for large-scale nanorobot manufacturing, and a large-capacity device is more suitable.

Mark did not pay too much attention to the reshaping of Uru metal. He still entered the virtual laboratory every day to design nanorobots or research more applications of rune technology. His daily schedule was very fulfilling.

After living like this for five days, Mark received the notification that the Pym particle preparation device had been assembled and assembled, passed the functional trial operation test, and could begin official operation.

After learning the news, Mark immediately launched the virtual stealth state and came to the company's underground production base.

Although the equipment has passed Dabai's trial operation test, Mark still hopes to witness with his own eyes the moment when his first rune technology equipment successfully creates Pym particles.

Turn on the equipment switch, and the eighteen new Ark reactors connected in series begin to input electrical energy into the two magic energy poles, converting it into magic power for the preparation device.

On the preparation device, with the continuous injection of magic power, the rune charms on the surface gradually began to emit a light blue light. When all the magic charms in the entire device were lit by magic power, the values ​​on the monitor also Something has changed.

The detector connected to the storage device showed that the presence of Pym particles had been detected in the Uru metal box that was originally in a vacuum state.

"Yay, it worked!"Mark excitedly waved his fist and shouted excitedly

"Congratulations, master. You successfully used a new civilization system to create Pym particles."Dabai sensed Mark's joy and promptly sent his congratulations.

"This is just the first step. Originally, I had completed the design of the nanorobot and planned to start mass production after preparing a sufficient amount of Pym particles.

But now I have changed my mind. This design can no longer meet my requirements. I should integrate rune technology into it and turn this design into the highest technological crystallization of earth technology and rune technology."

"But Master, after completing the existing device, we have very little Uru metal left in our hands, plus the losses in the manufacturing process.……"Dabai didn't want to dampen his master's enthusiasm, but it was Opportunity's own responsibility, so he still reminded him.

The corner of Mark's mouth curled up, and he said somewhat proudly:"About this, I have already thought of a solution just now.……"