If you are asked to take charge of the specialty class, how can you become a top student?

Chapter 841 Pattern
Soon, the people gathered together began to discuss.

Even the project has not been finalized yet, so the plan is currently being finalized.

After a long discussion, combined with various suggestions from everyone, the project was finally decided.

Fully intelligent automatic robotic arm.

This plan is mainly based on the actual application scenarios of vocational high school students. How many people have visited the workshops of various factories, and there are many uses of robotic arms. Therefore, once a more intelligent robotic arm can be produced in this direction, not only It can increase work efficiency and can even be used in medical treatment.

Just like a medical robotic arm.

Of course, it is only a general direction at present and needs to be adjusted according to actual application scenarios.

"To be honest, we haven't done much research on this aspect yet, so we first determine this plan, use the most basic model and then deepen it..." Liu Yuchen said while taking notes: "If we want to make a fully intelligent, we will There are many problems faced. The first is the computing power requirement, which requires the robotic arm to have the ability to learn deep on its own. This problem will be solved by Wang Xu and I."

There are also many aspects that need to be covered, including but not limited to somatosensory, intelligent recognition, mechanical load, etc.

Anyway, everyone is responsible for their own areas according to their professional direction.

Of course, these are mainly to determine the research direction. At present, no one has been exposed to the application of robotic arms. The first thing is to refer to the model.

The vocational high school does have a robotic arm, but it is not considered intelligent and requires manual operation, but it can be used as a model for reference.

After confirming this, all members of the scientific research team went to the vocational high school. After receiving approval, they first went to the practical classroom and saw the robotic arm.

Before anyone could react, Luo Hao and Liu Yuchen had already arrived in front of the robotic arm and looked around.

A group of people were a little confused.

Because these two people had wrenches and screwdrivers in their hands at some point, and their eyes lit up when they saw the robotic arm, as if they had an urge to dismantle it.

But after all, it is the school's teaching facility, and the structure is relatively complicated, so... Luo Hao asked people to watch at the door, dismantle it and study it first. If it cannot be put back together by then, at the worst, he will pay for it and buy one. new.

In a daze, the one-meter-long robotic arm was dismantled into parts by Luo Hao and Liu Yuchen.

The disassembly efficiency of the two people was astounding.

This kind of robotic arm is a semi-intelligent robotic arm, and some functions require manual operation. However, even so, the structure is very delicate, with many small parts, and the composition is quite complicated.

After it was taken down, everyone gathered together and then gathered around to think about it.

After studying for a while, I have almost written down everything that needs to be written down.

Everyone was still worried that they would not be able to put it back, but they obviously underestimated the abilities of Luo Hao and Liu Yuchen, so they put it back exactly as it was before. Luo Hao even studied with Liu Yuchen for a while and re-debugged the robotic arm. Fan.

Once used, my dear, the operation of the robotic arm is smoother than the previous one.

As a result, before leaving, everyone discovered that a screw fell out of Luo Hao's bag. Luo Hao subconsciously bent down to pick it up, but a lot of parts in the bag suddenly fell out and scattered all over the floor.

Everyone glanced at the ground.

?

"These parts are unnecessary." Luo Hao coughed: "Really? Sister Chen."

Liu Yuchen looked calm and nodded slightly: "It should be some duplicate parts left after many repairs, or even left over during repairs."

As she spoke, Liu Yuchen stuffed something into her pocket.

There are quite a few in her bag.Anyway, after we have the basic model, everyone starts to perform their own duties. The first thing to do is to create a relatively basic robot arm model framework through everyone's cooperation, and then continue to add or simplify it on this framework. First, the first-generation mechanical The model of the arm is made out.

The resulting picture is ready, but everyone doesn’t know where to make the framework.

Originally, he planned to go to a factory to customize it, but when Liu Yuchen took a look, it was not necessary.

Didn't Jiang Yuan specialize in casting during this period?
After all, Chen Chu lectures Jiang Yuan every day at Xingfu Xiaozao, and Liu Yuchen has long understood Jiang Yuan's direction.

Instead of going to the factory for customization, it would be better to let Jiang Yuan join in. Maybe it can help relieve Lao Chen's burden.

Liu Yuchen immediately found Jiang Yuan, explained his research project to Jiang Yuan, and showed Jiang Yuan the design drawings.

Jiang Yuan agreed without even thinking about it. Not to mention that she was currently in a casting frenzy because of Lao Chen's guidance. Her relationship with Liu Yuchen was already very good. Liu Yuchen even asked her for help, so she would definitely not help. It doesn't make sense.

I was very happy to accept this job, and went to Xin'an Township to start tinkering with the model myself.

Liu Yuchen also followed, because it required a lot of precision instruments. To be honest, Liu Yuchen didn't know much about Jiang Yuan's abilities, so he wanted to see it with his own eyes.

As a result, after looking at it, I found that Jiang Yuan really understood.

Lost wax method.

There is no need to go into detail about the specific process, but Jiang Yuan indeed showed extraordinary talent throughout the entire casting process.

The temperature control, film removal processing, etc. are all extremely professional.

In the final stage, Jiang Yuan also showed Liu Yuchen's unprecedented seriousness.

It has extremely strict requirements on accuracy and is manufactured entirely according to the data on the design drawings. Although not all of them were built at once, Liu Yuchen was very surprised by the finished product.

Can you not be surprised?
After all, since Jiang Yuan's abnormal state appeared, Chen Chudu gave lectures every day and taught her step by step.

Fortunately, Jiang Yuan's own learning ability is not bad. Coupled with her strong enthusiasm for making new friends, she is extremely serious when studying. In addition, she has a lot of practical experience, so she understands it quite quickly. Otherwise, Chen Chu I have to chase and feed them desserts every day.

If this back and forth didn't produce such results, Chen Chu wouldn't be so angry as to hang it on the wall.

For this reason, Jiang Yuan was also brought into the research team by Liu Yuchen, who was responsible for casting models and precision parts.

But Jiang Yuan soon realized that this was actually a trap.

Because of the setting of the large frame, there are requirements for the material structure of the main frame of the robotic arm, and the requirements must be more precise. Jiang Yuan's current skills are obviously unable to meet such requirements.

Jiang Yuan wanted to quit, but Liu Yuchen wouldn't let her.

"No! Aren't you doing things halfway? I hate people who quit halfway."

"But your demands are getting higher and higher..." Jiang Yuan felt a little aggrieved and shouted: "I can't do this!"

"If you can't do it, just learn it! Lao Chen must have given you a lot of information! Just think of ways to improve your abilities!" Liu Yuchen hurriedly said seriously: "If this project is really completed, maybe you will also I can recommend it! Do you know what it means to recommend it?"

Jiang Yuan's eyes lit up: "No need to go to class, let alone listen to Lao Chen's nagging!"

"..."

"pattern"

(End of this chapter)