Siheyuan: Originally I just wanted to be a little transparent

Chapter 234 This is too good at calculating.
Minister Liu looked around at everyone who was waiting for the next step, and said with a smile: "Comrades, the technical information in your hands is not provided by our comrades on the hidden front, but after we held the last demonstration meeting. After we asked our superiors for instructions, they recommended a comrade to us.”

"This comrade, in just fifteen days, used reverse engineering when disassembling the equipment to carry out reverse engineering, and thus drew all the relevant technical drawings of this instrument."

Whoa!
Minister Liu's words seemed to stir up a thousand waves with one stone.

No one expected that such an almost impossible task with tight time constraints, heavy tasks, and almost impossible tasks would actually be completed by our comrades!
They really couldn't figure out what kind of special genius it was that could create such a feat.

After three consecutive days of demonstration, all relevant experts involved in the demonstration agreed that the drawings and information provided by Lin Shengli were very feasible and complete.

This important instrument can be manufactured directly according to the relevant drawings provided by Lin Shengli.

On behalf of the comrades of the Seventh Research Institute, Secretary Xu reported the good news to the Sixth Machinery Department.

The relevant leaders of the Sixth Machinery Department immediately reported the good news to their superiors.

After listening to the report, the superior leaders were very happy and immediately instructed the Sixth Machinery Department to organize relevant units to produce this instrument as soon as possible.

The leader of the Sixth Machinery Department who came to report said to his superiors: "Leader, could you please transfer Comrade Lin Shengli, who provided these technical materials, to our Sixth Machinery Department? We hope that under this comrade's leadership, we can Under the guidance, we will produce this instrument."

Although the leader of the Sixth Machinery Department said his words very tactfully, his calculations were heard by others two miles away!

The superior leader was of course very clear about the plans of the Sixth Machinery Department. The superior leader thought for a while and said: "As for Comrade Lin Shengli, he still has very important tasks to complete and is temporarily unable to guide you. "

"As for the transfer of Comrade Shengli to your Sixth Machinery Department, you can discuss it with the Metallurgical Department and Comrade Shengli himself, but for a short period of time, you should not disturb Comrade Shengli..."

The leaders of the Sixth Machinery Department, seeing that they could not get any definite answers from their superiors, could only temporarily cease their activities and leave.

Although the abacus didn't work this time, it didn't matter. The relevant leaders of the Sixth Machinery Department did not give up. He remembered that his superiors said that he could discuss it with Lin Shengli himself.

Although they can't talk to Lin Shengli in the short term, they can afford to wait, there is always a chance!

As for the Metallurgical Department, "Humph, it's just Lao Sun and Lao Fang. If you have a chance, let's have a good chat with them. After a few bottles of wine, I'm afraid they won't agree!"
-
During the half month that Lin Shengli was assigned to the Sixth Machinery Department to carry out reverse mapping tasks, Dean Tang was extremely anxious.

When the Sixth Machinery Department greeted Dean Tang through their superiors, they were vague and did not say anything specific or the specific time. They only told Dean Tang that Comrade Lin Shengli needed to complete an urgent matter first. As for the mission, as for other things, I didn’t say anything!

It was hard for Dean Tang to inquire too much, but fortunately, the liaison officer of their research institute who stayed in Workshop [-] could see Lin Shengli every day, so he knew that Lin Shengli was still in the steel rolling mill.

So, Dean Tang called Director Yang every few days to ask if Lin Shengli was not so busy anymore.

Factory Director Yang had no choice but to rush in when he received Dean Tang's call at noon. When Lin Shengli was eating in the canteen, he asked, "Shengli, are you done?"

He didn't dare to ask any more unnecessary questions.

Lin Shengli's answer to him was always: "Not yet."

This kind of question and answer has been repeated many times in the past half month.

Lin Shengli knew that Dean Tang was probably worried. The importance of the precision equipment they needed was self-evident.

Dean Tang was patient and didn't rush him directly. He was already taking good care of him.

The reason why Dean Tang was so anxious was because from the moment Lin Shengli produced the first precision equipment and it was confirmed through testing that their project to imitate precision equipment was a real success, the relevant departments at the higher level began many rounds of inspections. Have a meeting to study how to make good use of this secret weapon.

The superior department believed that the right to speak brought by just replicating one such precision equipment was obviously not enough, so they allowed Lin Shengli to continue production.

But since Lin Shengli produced that precision equipment last time, almost a month has passed.

Although leaders from relevant departments have said hello, they don't know how long Lin Shengli will be busy with other projects.

The superiors could not urge Lin Shengli, but they could urge Dean Tang. However, Dean Tang could not contact Lin Shengli directly. He could only call Director Yang of the Red Star Rolling Mill again and again.

No, after half a month of busy work, Lin Shengli had just finished delivering the tasks for the Sixth Machine Department and was preparing to eat in the canteen.

I met Factory Director Yang on the road. Director Yang still said the same thing: "Shengli, are you done with your work?"

Lin Shengli nodded and said, "Well, I'm done."

When Director Yang heard this, he hurriedly pulled Lin Shengli toward his office and said as he walked: "Shengli, let's go to the office with me."

Director Yang was in such a hurry because Dean Tang had warned Lin Shengli that if Lin Shengli was finished, he must ask Lin Shengli to contact them as soon as possible.Lin Shengli was dragged by Factory Director Yang to Director Yang's office.

These days, the relevant higher-level departments and Dean Tang are really anxious.

So I have been waiting for Lin Shengli to finish his work. Today, I finally received a call from Lin Shengli. Dean Tang couldn't help but breathed a sigh of relief.

On the phone, Dean Tang once again emphasized the importance of precision equipment and asked Lin Shengli to ensure that the quality and technical indicators of the precision equipment manufactured must be the same as those manufactured last time and all meet the standards. .

He even vaguely revealed that the precision equipment manufactured by Lin Shengli was related to a very important plan.

Of course, on the phone, Dean Tang also spoke vaguely and vaguely, as if he was explaining an ordinary task.

"Okay, Dean Tang, I will complete the task with quality and quantity." Lin Shengli promised.

Although Dean Tang was anxious, he did not rush the production progress. It was obvious that he was afraid that if Lin Shengli speeded up, quality problems would occur.

In addition, Dean Tang also knows that Lin Shengli now wears many hats, and it is not just for their project.

Even if he has just completed an urgent task assigned by his superiors, he will not be too free next time.

Therefore, even though he was already furious, he did not ask the liaison personnel below to urge or inquire, nor did he directly ask Lin Shengli about the progress of manufacturing precision equipment. This can be regarded as Dean Tang's response. Lin Shengli took care of it.

Of course, Lin Shengli is well aware of this kind of care.

But he was also helpless. Some time ago, he was indeed unable to do anything at all. All his energy was focused on the project of the Sixth Machinery Department.

However, Lin Shengli has not completely given up on continuing to manufacture precision equipment.

While he was busy with the Sixth Machine Department project, he also dispatched early the parts list and related drawings that could be processed outside and needed to be provided by his superiors.

Lin Shengli had already planned that when he was done with the Sixth Machinery Department project, he would turn his head and go all out to manufacture the precision equipment that Dean Tang needed.

Regarding the Jingqi project, we have to wait until the Ministry of Commerce has completed the construction of the office and factory buildings and deployed all personnel before it is Lin Shengli's turn to guide related matters.

Next is the matter of the Fifth Master project. In the Fifth Master project, basically all the things that need to be done by him have been completed.

Now the Wuye project should have reached the final assembly stage, and the next step should be to complete the static test of the entire machine.

Once all these are completed, it’s almost ready for test flight!

As for the precision equipment counterfeiting project, although Lin Shengli paid little attention to it some time ago, the project has not been completely suspended. It is still moving forward, but the speed of advancement is extremely slow.

Now that Lin Shengli is back, the entire project is back on track.

In order to regain the half-month delay, Lin Shengli accelerated the progress of manufacturing this kind of precision equipment.

It used to take one and a half months to build one unit, but now, it has been shortened to almost one month, and one unit can be manufactured and assembled.

Ever since they learned that Lin Shengli was focusing his main energy on producing precision equipment, Dean Tang never asked about the progress.

Moreover, in order not to put too much pressure on Lin Shengli, he specifically instructed the liaison personnel staying at the steel rolling mill not to ask Lin Shengli about any progress, but to only fully cooperate with the defense of the project and external liaison and coordination. That’s it.

So almost a month later, when Lin Shengli finished manufacturing and assembling a piece of precision equipment, no one notified Dean Tang to come and pick up the machine. Lin Shengli didn't think about it, so he took the time to work on it. Continue to produce the second one.

It seems that two full months have passed since the last time I called Lin Shengli. Dean Tang finally couldn't sit still.

According to the plan that has been made above, if two more pieces of this kind of precision equipment cannot be added in two months, then the plan that has been made will be invalidated.

If that were to happen, not only would the superiors be unwilling, but Dean Tang would also feel extremely unwilling.

Originally, according to Lin Shengli's previous progress of manufacturing the precision equipment, it took less than a month and a half to manufacture one. After two months, it should be enough to manufacture one.

However, ever since Lin Shengli finished working on the Sixth Machinery Department and returned to their precision equipment project, there was no news that Lin Shengli had finished manufacturing a piece of precision equipment.

Is it?

　Thanks to the book friend Rogue Invincible, book friend with the tail number 07360 for the reward, thank you for your support, thank you!
　　
　
(End of this chapter)