Siheyuan: Originally I just wanted to be a little transparent

Chapter 171 How to know if you don't try
After Dean Tang put down the phone, he frowned. He didn't expect that mobilizing Lin Shengli would become so difficult.

Based on what Minister Fang just said, Dean Tang can tell that the project Lin Shengli is responsible for is at least a key project at the level of their unit, otherwise Minister Fang would not have asked such a question!

In this case, it would be increasingly difficult to mobilize Lin Shengli to come to their research institute!
But the more difficult it is, the more it proves how outstanding Lin Shengli is!How can such outstanding talents stay in a place like a steel rolling mill? What a waste!
Such talents must come to their institute!

Although Minister Fang’s words made Dean Tang feel that mobilizing Lin Shengli was very difficult, but how would you know if you don’t try!

If he can't do it, it doesn't mean that their Third Machinery Department can't do it either!
So, Dean Tang dialed the number of Director Sun, the head of the Three Machinery Department.

On the phone, Dean Tang briefly reported what he wanted to express to Minister Sun.

During the report, Dean Tang emphatically asked Minister Sun to retrieve relevant information about Lin Shengli in the name of the Third Machinery Department.

Because Dean Tang felt that the information about Lin Shengli that he learned from General Engineer Lu and Dean He today was not comprehensive enough.

If you want to poach someone, why can't you learn more about it in detail?

Minister Sun listened to Dean Tang's report and took it very seriously. He told Dean Tang that he would come to the department early tomorrow morning to attend a special meeting to study the counterfeiting of the precision equipment and the mobilization of Lin Shengli. .

Regarding the acquisition of relevant information about Lin Shengli, he will now arrange for people to implement it.

After receiving a very serious reply from his superiors, Dean Tang went to the celebration banquet and toasted everyone with several glasses of wine.

The main purpose of Dean Tang's coming to the celebration banquet was to see what Comrade Lin Shengli, the genius they had longed for, looked like, and to brush up on his favorability with Comrade Lin Shengli!
Everyone was extremely happy that Dean Tang came to toast everyone, and they all raised their glasses to clink their glasses with Dean Tang!
Lin Shengli was naturally the one to take care of. Dean Tang was in high spirits and had several drinks with Lin Shengli. However, Lin Shengli always accepted everyone who came, and he could drink as much as he wanted.

Dean Tang, who originally had a good impression of Lin Shengli, a handsome and energetic young man, was very generous when he saw Lin Shengli drinking, and he seemed to have an amazing amount of alcohol. He didn't look at Lin Shengli, who was drinking a glass to the left and a glass to the right. No change of color, no hint of drunkenness!

Now, Dean Tang and Vice Dean He, who were both from the military, had a better impression of Lin Shengli.

They think that this person who can drink, has a large drinker, and has good wine will definitely be good at things!

As the saying goes, there is no such thing as a banquet that lasts forever. This celebration banquet gradually came to an end amidst everyone's drinking and drinking.

Just as Lin Shengli thought, the institute sent a special vehicle to send the professionals who were picked up today back home one by one.

Most of these professionals are three or four people in one car.

But Lin Shengli was different. The institute sent a special car to bring him safely back to the courtyard.

After returning to his home in the courtyard, Lin Shengli checked the time. Fortunately, although the banquet was delayed for a while because Dean Tang came over to toast, Lin Shengli got home before 11 o'clock in the evening.

Lin Shengli seized the time and signed today's arrival first.

In order to cope with emergencies like today's in the future, Lin Shengli decided to go to bed late during this period and wait until after 12 o'clock before signing in for tomorrow. In this way, he would have almost 48 check-in times. Hours of buffering period!Because Lin Shengli came back too late today, the heating stove that was holding the fire was basically extinguished. Lin Shengli worked hard for a while to get the fire going again.

After boiling water and washing his feet, Lin Shengli picked up a newly discovered yellowed ancient book in the "box" of books today, called What's the Sky and What's Huan, and read it carefully.

The next day, Lin Shengli went to work as usual and continued to work on improving the pilot workshop of the Fourth Branch Factory.

As for Dean Tang, the special meeting he came to attend in the morning was filled with endless debates.

As for whether to imitate the precision equipment used by Dean Tang and his affiliated research institutes, there is no debate about this.

This is a good thing that benefits the country and the people. The leaders present at the meeting unanimously agreed that they were eager to start counterfeiting precision equipment immediately.

As for Lin Shengli, he was the only candidate to imitate that precision equipment.

However, the use and ownership of Lin Shengli has become the focus of everyone's debate!

The point that caused everyone's controversy was that after their Third Machinery Department obtained Lin Shengli's detailed resume, the contents recorded in it shocked the leaders present at the meeting!

Lin Shengli’s resume records this:

Lin Shengli, now 20 years old, graduated from a technical secondary school. His parents worked to support the people who were killed in the Great Northwest, and his uncle was a hero and model who sacrificed his life to save national property...

This alone can prove that Lin Shengli’s wealth and resume are clean and he has a good foundation!

Lin Shengli's position and technical level are: deputy director, chief engineer, technical section chief of Hongxing Steel Rolling Mill, leader of the new rolling mill R&D and imitation project team, deputy leader of the new rolling mill project leadership and coordination team of the steel rolling mill, and the entire workshop of the steel rolling mill. Leader of the rolling mill renovation project team;

A fourth-level senior engineer from the Ministry of Metallurgy. He is good at the maintenance, modification, design, and research and development of mechanical equipment. He is proficient in skills such as Yingjiang and Mao Xiongwen.

As the main person in charge, he completed the upgrade and transformation work of a certain type of rolling mill. The technical level of the new rolling mill after transformation has surpassed the international advanced level. It is estimated that its advanced level is 20 years ahead of the international level.

With the approval of his superiors, Lin Shengli became the general person in charge of the key industrial project of the Ministry of Metallurgy, the new four-roller rolling mill, and the development and counterfeiting project.

While working on the development of new imitation rolling mills, Comrade Lin Shengli also improved the production process of raw materials and finished products for steel ropes, so that the new high-strength steel ropes produced not only meet the needs of superiors, but also exceed performance indicators. Internationally advanced level, it is also a product that leads the world in technology for 20 years.

During his work in the steel rolling mill, he repaired various mechanical equipment many times, etc...

And now, we have to add to it the maintenance of very important advanced precision equipment for a subsidiary research institute of their research institute.

After that, we have to add the title of the project leader for imitating some kind of precision equipment that represents high-precision technology!
After reading Lin Shengli's resume, the leaders of the Third Machinery Department who attended the meeting agreed that how could such an outstanding talent stay in the Metallurgical Department to smash iron? This must be done by their Third Machinery Department, which is the most suitable one. Well!
(End of this chapter)