Siheyuan: Originally I just wanted to be a little transparent

Chapter 145: Being ripped off by the third uncle

Seeing that no breakthrough could be found from the steel rolling mill, these external system departments and the factory began to show their talents again.

They thought that since they couldn't open a gap with the leaders of the steel rolling mill, they would just start with Lin Shengli himself or his relatives.

They wanted to investigate Lin Shengli's relevant files and social connections to see if Lin Shengli had any hobbies and whether his relatives and friends needed work arrangements.

Most of the units and departments outside the system that have this idea are at the departmental level.

Those who are higher up, Lin Shengli is probably not in their sights yet, and those who are lower down don't have the qualifications and strength to poach Lin Shengli.

But when these bureau-level units and departments went to check Lin Shengli's files, they all ran into a wall. They discovered that they did not have the authority to check Lin Shengli's files.

And these bureau-level units and departments are not vegetarians. After listening here and there, they discovered that behind Lin Shengli, in addition to the Ministry of Metallurgical Industry, there was also a vague shadow of a military boss and a certain deputy Ouchi!
This discovery caused these units and departments to temporarily cease their activities. At the same time, those people with lively thoughts wanted to get to know Lin Shengli even more.

They wanted to get to know the big shots behind Lin Shengli through Lin Shengli. Even if they couldn't get to know the big shots behind Lin Shengli, just getting to know Lin Shengli, a promising new star, would be very beneficial to them.

The most interesting thing about this is that some people who had no connections but wanted to get to know Lin Shengli didn't know whether they were hungry or desperate, but they actually found the head of the third uncle in the courtyard, who was making a lot of calculations.

At first, the third uncle was more cautious and didn't say much when asked.

Those people took out their official work certificates and said that they came to inquire about Lin Shengli because they heard that Comrade Lin Shengli's level of repairing machines was very high, and they wanted to ask Lin Shengli to help their unit repair the machinery and equipment.

But because there were too many people queuing up to find Lin Shengli in the factory, they couldn't see Lin Shengli for a while, so they came to the courtyard to try their luck.

Although these people said this and the third uncle also saw their work certificates, the third uncle still didn't say much.

But after these people were very discerning and gave the third uncle a box of pastries, the third uncle's eyes lit up and he immediately changed his face.

But the third uncle should still be cautious.

What he revealed to those who wanted information about Lin Shengli was public information that everyone knew and was not secret at all.

Moreover, he also gave out this public information bit by bit, like squeezing out toothpaste.

As for the remuneration his third uncle received for disclosing information, he didn't dare to go too far, so he only collected cakes, candies, and other bits and pieces of non-staple food from time to time, which were not too valuable.

Fortunately at first, those who wanted to inquire about Lin Shengli didn't think there was anything wrong.

But after going back and forth, they discovered that what this third uncle said was all the public information they knew, and there was no useful information at all that they wanted to know.And with so little public information, it’s like squeezing out toothpaste. Revealing a little bit today and a little bit tomorrow is obviously trying to gain their advantage. It’s really unlucky to think about it!
Although they were unlucky, the small favors they gave were indeed not worth much, so these people thought they were unlucky and cut their losses in time.

Lin Shengli has no idea about the disturbances from the outside world, and has no understanding!
Right now, he was looking worried at the two parts in his hand that looked exactly the same and had the same dimensions and specifications!
They were obviously exactly the same and should be universal, but the huge difference made Lin Shengli worried and his head hurt!

Lin Shengli and Factory Director Yuan were keeping an eye on the parts and components that were processed during the original transformation project team. The people who processed and manufactured these parts were all carefully selected seventh- and eighth-grade engineering masters in the factory. Their processing accuracy and finished products were The rate is relatively guaranteed.

But since all the processing and production of these parts were transferred to the fourth branch, the yield and accuracy issues have become more and more prominent.

When they renovated the rolling mills in the various workshops of their steel rolling mill, these skilled seventh- and eighth-level masters could barely supply the parts needed for small-scale processing and production. At most, it was a little slower, but the yield rate was still the same. guaranteed.

But since we took over the 20% share of the entire metallurgical system to transform the production of rolling mill parts, and then let these seventh- and eighth-level masters specialize in the production of parts, this model obviously will not work.

It turns out that there are only so many masters in the transformation project team. It is already very laborious to supply the internal transformation of the steel rolling mill. How can we still supply the share of the entire metallurgical system that needs transformation? They are exhausted. , can’t do it either!
Besides, these skilled seventh- and eighth-level workers now have more important tasks. They have to cooperate with Lin Shengli's development and counterfeiting of new rolling mills.

It turns out that when the rolling mill was renovated, the changes accounted for almost 50% of the entire machine. Those modified parts could already be produced by these seventh- and eighth-level masters, but this time, the other 50% All parts and components are produced.

These people in the current counterfeiting project team have no time and energy to do other things!
But Lin Shengli can't do that. In addition to being the team leader of the counterfeiting project, Lin Shengli is also the deputy director, chief engineer, and technical section chief of the factory.

Lin Shengli did not get this big title and subsidy for nothing. Lin Shengli had to consider everything.

Lin Shengli had his own intentions when he originally asked Branch No. [-] to take over the production of parts needed to transform the rolling mill at this stage.

This is to increase the related benefits of the steel rolling mill. After all, the wealth does not flow to outsiders. As a member of the steel rolling mill, Lin Shengli, what he created, must hope that the cake will stay in the steel rolling mill.

The second is to allow the fourth branch to become familiar with the production and manufacturing of rolling mill parts as soon as possible, laying a foundation for the full production of overall rolling mill equipment in the future.

Third, Lin Shengli planned to use the development of a new imitation rolling mill as an opportunity to use the Fourth Branch Factory as an experimental base to see if he could advance the standardization process in the manufacturing field.

It only took more than 20 days to merge the fourth branch factory into the steel rolling mill and start producing related parts.

In these days, Lin Shengli was not only busy developing and renovating new rolling mills, but also took the time to build a high-strength steel cable.

Lin Shengli originally thought that after the first prototype of the counterfeit equipment was manufactured, he would then use this prototype as a basis to improve the standardized production process of the Fourth Branch Factory.

But looking at the two parts with huge tolerances in his hands, Lin Shengli felt that this standardization matter cannot be delayed!
It is not difficult for their project team to build a prototype, but for large-scale production, the tolerance of this component is too large, which is a serious problem.

(End of this chapter)