Siheyuan: Originally I just wanted to be a little transparent
Chapter 120 The good old man complained
Chapter 120 The good old man complained
Team Leader Bao remembered that he had just warned people like Liu Haizhong that this equipment should be used carefully, but why didn't any of them listen to the advice? How could this old-fashioned equipment withstand the high load and high pressure? Use of intensity.
I was angry, but as expected of a good person in the technical department, Team Leader Bao was still conscientious and led people to repair the machine.
Before leaving, Team Leader Bao repeatedly warned Liu Haizhong and the others that they could no longer operate the equipment at high load, otherwise, the machine would have to sit down.
Liu Haizhong's apprentices thanked him profusely and sent away the somewhat sullen Team Leader Bao, and then began to get back into their intense work.
Team leader Xu Shibao's words had an effect. Maybe it was because the apprentices were asked to scrap two workpieces twice before, so Liu Haizhong had to pay attention.
This time, Liu Haizhong did not let his apprentices get started, but asked them to help him. He started processing the workpiece himself.
This time, Liu Haizhong did not dare to adjust the operating power of the device to the maximum, but he also did not adjust it too low, at least 80% of the operating power of the device.
If he goes any slower, Liu Haizhong will not be able to complete the task assigned to him today, even if he takes it upon himself.
After slowing down the speed, the old equipment ran normally for a period of time, and Liu Haizhong also took the time to complete the processing of several workpieces.
Taking advantage of the break to drink water and go to the bathroom, Liu Haizhong calculated that it was already 10:[-]. This should be completed. It was almost half of the normal workload. I would work harder later and try to finish the normal work before lunch. workload is completed first.
In the afternoon, he could concentrate on dealing with those few fine workpieces. Although he was a little tired, the thought that he would soon be able to realize his wish to become an official immediately made him full of energy!
Wishes are beautiful, reality is cruel!
Liu Haizhong was still immersed in his wonderful expectations, and this old-fashioned machine fell into disrepair again.
Yes, let’s invite Team Leader Bao again!
The young apprentice who went to hire Team Leader Bao was trained all the way by the people in the technical department. After arriving at the workshop, Team Leader Bao inspected him. He, a good old man, couldn't help it. He said a few words to Liu Haizhong, and he was still upset in his heart. Stop complaining about bangs.
"What a tossing person. You are not tormenting me like this. This is probably the third time this morning.
If this was because of the fault of the machine equipment itself, he couldn't say anything about it, but these three times, it was all caused by improper use. This one went left and right, this is what the stupid boy did. !
In Liu Haizhong's workshop, they just pulled out this outdated equipment and used it, so forget it. But in this stupid Liu Haizhong, if you fix it, you break it, if you fix it, you break it. I'm afraid no one will believe it if it's not intentional. ! "
However, complaints are complaints, and you have to do what you should do. The professionalism of our team leader Bao is still worthy of admiration.
Team leader Bao led his people and began to repair nervously. It broke down three times in a row. This time the repair was much more complicated than the previous two. Some parts needed to be replaced, but fortunately, the one for this old equipment Parts are still available in their technical department.
But if you want to repair this equipment, it will take more than two hours no matter what.
When Liu Haizhong heard this, he was immediately dumbfounded. He didn't expect that this broken machine would be so bad if it didn't give him face.
Even if it was repaired, it would be one or two o'clock in the afternoon. He would be delayed for such a long time without being able to work. He had bangs in his hair, but he hadn't even completed the normal tasks assigned to him. How could he finish those few fine workpieces in the afternoon? Processing tasks!
When the military order was issued, he promised that he would win over the processing tasks of finely crafted parts only after completing the normally assigned tasks.
According to the current situation, he will either be unable to complete the normally assigned tasks, or he will not be able to complete the processing tasks of fine workpieces.
However, regardless of whether he could complete the task or not, he would still have to be punished.When I think of this, my bangs are spinning anxiously and my head is covered with sweat!
It's not that Liu Haizhong hasn't thought about returning to his original workstation and continuing to work, but since he took the initiative to take over his current workstation, his original workstation has been assigned to someone else.
Now there is something wrong with the machine at his Liu Haizhong station, and he wants to go back to his original station. How is that possible? Why is his face so big? No one will pamper him.
How about borrowing a workstation?It doesn't work!Even if he borrows his apprentice's work station, that won't work!
Everyone has their own production tasks, and if they lend their workstations to you, what will happen to their own production tasks?
With his bangs spinning around anxiously, he finally came up with a solution.
Liu Haizhong evenly distributed half of his unfinished normal work tasks to the few apprentices who had work stations. In this way, the workload of each of them would not be too much, and they would not be afraid of not being able to complete the work. .
As for himself, he only needs to concentrate on waiting for the equipment to be repaired, and then concentrate on the few fine workpieces in the afternoon.
Liu Haizhong's move made several apprentices complain. After all, the only ones who could be assigned work stations were formal workers who had already become apprentices.
There are quite a few normal tasks assigned to them every day, and they can just complete them if they work normally every day.
This suddenly increased the workload, and they had to sacrifice their lunch break to complete the extra workload. No one would be willing to do this!
However, they were frightened by Liu Haizhong's master's power, and they dared not speak out in anger, so they did not refuse.
Our team leader was very capable. At almost two o'clock in the afternoon, the old equipment was finally repaired.
However, Team Leader Bao suggested that this equipment should not be put into production in a hurry. After all, parts have been replaced inside, at least it is a low-power one. It needs to be run in for a day or two. After it can be run in, the power of the equipment cannot exceed 60% of the original.
Finally, Team Leader Bao sternly warned Liu Haizhong and the others not to come to their technical department to repair the damage if it was caused by them again, because they would no longer have replacement parts for them.
Not only that, their technical department would also report Liu Haizhong's deliberate damage to the machine and his deliberate tormenting of their technical department to the factory leaders.
Liu Haizhong, who had been severely warned, seemed a little smarter.
He started running the car at the lowest power setting, and after running it for a few minutes, nothing happened, so he increased the power little by little.
It’s not that he doesn’t want to follow Team Leader Bao’s advice and let the machine run in for a day or two. Time is running out!
The raw materials for this fine workpiece have been delivered to his work station in Liu Haizhong. Now he is on the verge of making a move and has to make a move!
If the machinery and equipment breaks down, the defendant will be punished in the factory. If the finished product cannot be completed, the defendant will also be punished.
It's also a knife to extend the head, and it's also a knife to shrink the head. Either way, you will die, so it's better to fight.
I hope the equipment can be more powerful this time, so that he can finally complete the processing task of fine workpieces in his bangs, and he can lie down again!
As long as he can successfully complete this processing task of precision parts, the official hat will still be in his pocket!
(End of this chapter)
Team Leader Bao remembered that he had just warned people like Liu Haizhong that this equipment should be used carefully, but why didn't any of them listen to the advice? How could this old-fashioned equipment withstand the high load and high pressure? Use of intensity.
I was angry, but as expected of a good person in the technical department, Team Leader Bao was still conscientious and led people to repair the machine.
Before leaving, Team Leader Bao repeatedly warned Liu Haizhong and the others that they could no longer operate the equipment at high load, otherwise, the machine would have to sit down.
Liu Haizhong's apprentices thanked him profusely and sent away the somewhat sullen Team Leader Bao, and then began to get back into their intense work.
Team leader Xu Shibao's words had an effect. Maybe it was because the apprentices were asked to scrap two workpieces twice before, so Liu Haizhong had to pay attention.
This time, Liu Haizhong did not let his apprentices get started, but asked them to help him. He started processing the workpiece himself.
This time, Liu Haizhong did not dare to adjust the operating power of the device to the maximum, but he also did not adjust it too low, at least 80% of the operating power of the device.
If he goes any slower, Liu Haizhong will not be able to complete the task assigned to him today, even if he takes it upon himself.
After slowing down the speed, the old equipment ran normally for a period of time, and Liu Haizhong also took the time to complete the processing of several workpieces.
Taking advantage of the break to drink water and go to the bathroom, Liu Haizhong calculated that it was already 10:[-]. This should be completed. It was almost half of the normal workload. I would work harder later and try to finish the normal work before lunch. workload is completed first.
In the afternoon, he could concentrate on dealing with those few fine workpieces. Although he was a little tired, the thought that he would soon be able to realize his wish to become an official immediately made him full of energy!
Wishes are beautiful, reality is cruel!
Liu Haizhong was still immersed in his wonderful expectations, and this old-fashioned machine fell into disrepair again.
Yes, let’s invite Team Leader Bao again!
The young apprentice who went to hire Team Leader Bao was trained all the way by the people in the technical department. After arriving at the workshop, Team Leader Bao inspected him. He, a good old man, couldn't help it. He said a few words to Liu Haizhong, and he was still upset in his heart. Stop complaining about bangs.
"What a tossing person. You are not tormenting me like this. This is probably the third time this morning.
If this was because of the fault of the machine equipment itself, he couldn't say anything about it, but these three times, it was all caused by improper use. This one went left and right, this is what the stupid boy did. !
In Liu Haizhong's workshop, they just pulled out this outdated equipment and used it, so forget it. But in this stupid Liu Haizhong, if you fix it, you break it, if you fix it, you break it. I'm afraid no one will believe it if it's not intentional. ! "
However, complaints are complaints, and you have to do what you should do. The professionalism of our team leader Bao is still worthy of admiration.
Team leader Bao led his people and began to repair nervously. It broke down three times in a row. This time the repair was much more complicated than the previous two. Some parts needed to be replaced, but fortunately, the one for this old equipment Parts are still available in their technical department.
But if you want to repair this equipment, it will take more than two hours no matter what.
When Liu Haizhong heard this, he was immediately dumbfounded. He didn't expect that this broken machine would be so bad if it didn't give him face.
Even if it was repaired, it would be one or two o'clock in the afternoon. He would be delayed for such a long time without being able to work. He had bangs in his hair, but he hadn't even completed the normal tasks assigned to him. How could he finish those few fine workpieces in the afternoon? Processing tasks!
When the military order was issued, he promised that he would win over the processing tasks of finely crafted parts only after completing the normally assigned tasks.
According to the current situation, he will either be unable to complete the normally assigned tasks, or he will not be able to complete the processing tasks of fine workpieces.
However, regardless of whether he could complete the task or not, he would still have to be punished.When I think of this, my bangs are spinning anxiously and my head is covered with sweat!
It's not that Liu Haizhong hasn't thought about returning to his original workstation and continuing to work, but since he took the initiative to take over his current workstation, his original workstation has been assigned to someone else.
Now there is something wrong with the machine at his Liu Haizhong station, and he wants to go back to his original station. How is that possible? Why is his face so big? No one will pamper him.
How about borrowing a workstation?It doesn't work!Even if he borrows his apprentice's work station, that won't work!
Everyone has their own production tasks, and if they lend their workstations to you, what will happen to their own production tasks?
With his bangs spinning around anxiously, he finally came up with a solution.
Liu Haizhong evenly distributed half of his unfinished normal work tasks to the few apprentices who had work stations. In this way, the workload of each of them would not be too much, and they would not be afraid of not being able to complete the work. .
As for himself, he only needs to concentrate on waiting for the equipment to be repaired, and then concentrate on the few fine workpieces in the afternoon.
Liu Haizhong's move made several apprentices complain. After all, the only ones who could be assigned work stations were formal workers who had already become apprentices.
There are quite a few normal tasks assigned to them every day, and they can just complete them if they work normally every day.
This suddenly increased the workload, and they had to sacrifice their lunch break to complete the extra workload. No one would be willing to do this!
However, they were frightened by Liu Haizhong's master's power, and they dared not speak out in anger, so they did not refuse.
Our team leader was very capable. At almost two o'clock in the afternoon, the old equipment was finally repaired.
However, Team Leader Bao suggested that this equipment should not be put into production in a hurry. After all, parts have been replaced inside, at least it is a low-power one. It needs to be run in for a day or two. After it can be run in, the power of the equipment cannot exceed 60% of the original.
Finally, Team Leader Bao sternly warned Liu Haizhong and the others not to come to their technical department to repair the damage if it was caused by them again, because they would no longer have replacement parts for them.
Not only that, their technical department would also report Liu Haizhong's deliberate damage to the machine and his deliberate tormenting of their technical department to the factory leaders.
Liu Haizhong, who had been severely warned, seemed a little smarter.
He started running the car at the lowest power setting, and after running it for a few minutes, nothing happened, so he increased the power little by little.
It’s not that he doesn’t want to follow Team Leader Bao’s advice and let the machine run in for a day or two. Time is running out!
The raw materials for this fine workpiece have been delivered to his work station in Liu Haizhong. Now he is on the verge of making a move and has to make a move!
If the machinery and equipment breaks down, the defendant will be punished in the factory. If the finished product cannot be completed, the defendant will also be punished.
It's also a knife to extend the head, and it's also a knife to shrink the head. Either way, you will die, so it's better to fight.
I hope the equipment can be more powerful this time, so that he can finally complete the processing task of fine workpieces in his bangs, and he can lie down again!
As long as he can successfully complete this processing task of precision parts, the official hat will still be in his pocket!
(End of this chapter)
You'll Also Like
-
A noble son from a poor family
Chapter 81 301 days ago -
Entertainment: Take advantage of Tianxian’s youth and give her a boss’s license
Chapter 63 301 days ago -
I am Wen Zhong!
Chapter 54 301 days ago -
Industrial Survey: Are you a private enterprise engaged in black technology?
Chapter 52 301 days ago -
In the mixed martial arts adventure, all the heroines are broken
Chapter 61 301 days ago -
Let you write about a small character's counterattack, and you write about the Hongwu Emperor
Chapter 53 301 days ago -
Super God: Knock out Hua Ye and drag Kesha into the woods
Chapter 61 301 days ago -
Siheyuan: I, Qi Tongwei, started in 1980
Chapter 50 301 days ago -
Xuanxian Supreme
Chapter 190 301 days ago -
Siheyuan: I am a fool, and I show off to the audience
Chapter 53 301 days ago