If you are asked to simulate committing a crime, will you become the godfather of crime?

I saw Chen Yi continuing to build gun barrels, discarding one barrel after another.

After a while, there was a mountain-like pile next to it.

Although Chen Yi's use of drilling machine tools, understanding of firearms, and craftsmanship have all reached the extreme, the accuracy of this machine tool is still far behind the machine tools that specialize in making sniper rifles.

It is absolutely impossible to mass-produce top-notch sniper rifles with this machine tool.

In fact, if it had been anyone else, even with manual adjustments, it would be absolutely impossible. Only when you reach Chen Yi's level can you increase the possibility a little bit.

Bang, another gun barrel was discarded by Chen Yi.

Bang, another gun barrel was discarded by Chen Yi.

Yang Mi, Wang Ou, and three amateur teammates picked up the discarded gun barrel and looked at it. They found that the barrel looked close to perfect, but Chen Yi was not satisfied yet.

After a while, Chen Yi finally stopped.

After staring at the barrel for a long time, I was finally satisfied. When drilling, I rinsed the bore with engine oil. Now I don't need to wash it. I can see a completely straight hole inside.

When measured with the inner caliper, the error can be found to be zero.

Wang Ou, Yang Mi and their three teammates had been keeping quiet before and were not daring to disturb them. Now they were about to express their admiration when they saw Chen Yi immediately start the next step.

Just now it was just drilled and turned into an ordinary gun barrel.

But as a sniper rifle, it is impossible not to have rifling grooves.

Rifling is also called"rifling", and there are multiple spiral grooves in the gun and gun barrel. The long groove recessed into the chamber wall is called the Yin line, and the long strip between the two grooves is called the Yang line. The function of rifling is to make the warhead rotate at high speed like a top after flying out of the barrel, ensuring a stable flight attitude, increasing range and improving accuracy.

Compared with drilling, this is the most difficult part of the barrel.

Moreover, at this step, non-professional machine tools are no longer of use.

Chen Yi's method was completely manual. Even after seeing Chen Yi's operations, the three amateur teammates still felt that Chen Yi was crazy. No matter how you looked at it, it was impossible.

How can a person achieve the same effect as a precision machine by using only manual work, and the operation is inside a very small barrel, which is extremely inconvenient.

But Chen Yi used a very small and long carving tool that could be inserted into the barrel to carve. The head of the carving was even slightly curved, like a curved stroke.

Such an extremely awkward-looking tool is extremely easy to use, and Chen Yi is like a flexible elf, moving smoothly inside the barrel. This carving tool is obviously made of extremely sharp and hard materials, even metal pipes can It was relatively easy to carve, and Chen Yi's operation did not have any deviation, carving exquisite rifling grooves extremely accurately and smoothly...

After carving, he polished it carefully.

Curves, depth, width, edge roundness... every detail has reached the point of absolute perfection.

The firearms expert was stunned:"Is this still a human being?"

A senior machine tool technician said:"His hands are like the highest precision machine tools."

Retired special forces:"What's even more frightening is that if this barrel is really hand-made, then its Rifling and bullet patterns are unique. Generally, legal guns have ID cards like people. Even if they are bought on the black market, they can be traced according to type. Various types of guns have their own specific patterns, but they are handmade. Yes, that is a black gun that cannot be traced in an absolute sense."

The audience in the live broadcast room had seen Chen Yi's curved painting skills, hand-made props, etc., so they were not too surprised by this, but when they saw it again, they couldn't help but sigh. :

"Purely hand-made rifling grooves, awesome"

"And it’s not just an ordinary gun rifling, it’s a sniper rifle rifling."

"A slight deviation can make a huge difference. The rifling of a top-level sniper rifle should not allow even a slight deviation. If the deviation is just a tiny bit, the bullet trajectory will deviate. This deviation will have a huge impact on the accuracy. A slight deviation will cause a larger deviation. , it may jam or even explode. Logically speaking, it is impossible to do it manually. But Chen Yi's words are a different matter. After all, this guy can enlarge the US dollar bill version dozens of times without any deviation, and even the banknote detector can fool it." (To read exciting novels, go to Feilu Novel Network!)

"Perhaps only Chen Yi in the world can do this job."

I saw Chen Yi carving for a while and then used the inner calipers to measure it to ensure that the absolute error was zero. He continued to carve, keeping the speed stable and neither too fast nor too slow.

As he carved bit by bit, Wang Ou, Yang Mi, and The three amateur teammates were becoming more and more afraid to breathe. Even when they struck, they were cautious. They were afraid that an accident would cause Chen Yi to make a mistake. If there was a slight mistake, there was no room for repair. This was a sniper rifle. The rifling will not be up to standard with any kind of repair. In other words, a slight mistake will lead to wasted efforts. In that case, they will become sinners. From this moment,

Chen Yi's seriousness can also be seen how critical it is. When drilling holes before, he could still be distracted, but now, he was 100% focused. Fine beads of sweat began to appear on his forehead. Yang Mi and Wang Ou wanted to help Chen Yi wipe it, but I didn't dare to wipe it for fear of affecting Chen Yi.

The audience in the live broadcast room became more and more angry and did not dare to breathe. The more sculptures were completed, the higher the cost of failure. If more than half of the sculptures were completed and they still failed, then everyone would I'm going to be so angry.

At the same time, at the General Headquarters in Beijing,

Wang Jun just finished the meeting and walked out of the conference room.

A subordinate came up and said quickly:"Major General, Chen Yi is doing something again."

"What did he do again?"Wang Jun held his forehead, a little helpless. Chen Yi's actions always bring surprises, but sometimes they are really too exciting.

"He's building a sniper rifle."

Wang Jun was stunned. Attack? []

Wang Jun was a little doubtful that he had misunderstood:"You are talking about buying parts for modification?"

"No, it was made of pure materials. He wanted to make a black gun that could not be tracked."

Wang Jun's brows jumped wildly. If you want to make a pistol or a black gun, it's easier to understand. After all, a pistol is much simpler, but how is it possible to make a sniper gun and a black gun from pure materials?

His subordinate quickly opened the live broadcast room and showed it to Wang Jun.

Wang Jun looked at He glanced at it and took a deep breath. He carved the rifling of the sniper rifle by hand. What kind of international joke are you kidding? But looking at his operation, it was really going on perfectly.

"Major General, do you want to stop him? Although it is just a simulation, it may have a bad impact."

Wang Jun was stunned for a moment, shook his head and said:"No, there will be any bad influence. Are you still worried that someone can imitate him? His rifling seems to be a completely new design, and based on his previous remarks, he is developing a new sniper rifle. If it is successful and has performance similar to AWM, it will be a great achievement. It will save our military an unknown amount of research and development expenses. Not only don’t you need to stop him, but you can still ask if you need anything, but just contact him and let him broadcast the key parts separately."